Install your sensor as pictured below:
- On a doorframe
- Flush with the edge of the doorframe
- Unobstructed by the doorframe itself
- Facing in the direction of foot traffic
Single doors: Install your sensor about 5 feet high on the side of the doorframe for maximum accuracy.
Double doors: You must install your sensor at the top of the doorframe for double doors. Install your sensor directly in the middle on the top of the doorframe for maximum accuracy.
Correct single door installation:
Correct double door installation:
Incorrect installation examples
Wrong: Not on the edge of the doorframe
Don’t install the sensor off of the edge of the doorframe, where building features or other factors such as the doorframe itself will block the sensor’s effectiveness.
Wrong: On the door itself
Don’t install the sensor onto the door itself, since this won’t count visitors accurately. Dor counts people, not door swings.
Wrong: Too low or too high side-mounted
Don’t install the sensor lower or higher than five feet, since it will affect accuracy on a single door.